Vahra Technology Semi-Automatic Water Level Controller (EMU) Pump Controller | Single-Phase Submersible Pump | Auto Stop When Tank Is Full

About Vahra Technology Semi-Automatic Water Level Controller (EMU) Pump Controller

The EMU2 is a semi-automatic water level controller designed to turn the motor OFF automatically when the tank becomes full. The motor can be started manually by the user. This device works with only two wires for the tank and is compatible with all types of starters as well as motors without starters.This is a semi-automatic water level controller for tank overflow ,that switches OFF the motor automatically when the tank becomes full. The motor needs to be turned ON manually by the user. It works using only two wires connected to the tank sensors and can be installed with all types of starters or even without a starter motor.
With this model -No need to turn OFF your motor by manual .motor will auto stop after tank full. No OVERFLOW,No wastage of water,No wastage of electricity

Key Features & Benefits of Vahra Technology Semi-Automatic Water Level Controller (EMU) Pump Controller

• Suitable for all types of starters and without a starter
• Semi-automatic operation based on tank water level
• Automatically turns OFF the motor when the tank becomes full
• Requires only 2 wires for the overhead tank
• Works with carbon or magnetic sensor kits
• 2-mode operation: AUTO / OFF
• Up: OFF mode – controller remains switched off
• Down: AUTO mode – device operates automatically
• Push button to manually turn ON the motor when installed without a starter
• Motor ON LED
• Tank Full LED
• N.O Output LED
• No additional protections required for this model

Specifications

• Operating Voltage: 170V AC to 290V AC
• Frequency: 50–60 Hz
• Power Consumption: 6W
• Sensor Operating Voltage: 5V DC
• Relay Rating: 30A (Heavy Duty)
• Suitable Motor Capacity: Up to 2 HP
• Sensor Type: Carbon or Magnetic sensor kit
• Sensor Current: Ultra-low current (µA) for long life
• Installation: Easy installation
• Wiring: Only 2 wires required for the overhead tank

Uses

• Prevents water tank overflow by automatically switching OFF the motor when the tank is full.
• Allows the user to manually turn ON the motor when water filling is required.
• Automatically switches OFF the motor based on the tank water level.
• Can be used with all types of starters or without a starter.
• Suitable for overhead tank water-level control using only two sensor wires.
• Can be used with carbon or magnetic sensor kits.
• Helps save water, electricity, and time.
• Provides clear indication through Motor ON, Tank Full, and N.O Output LEDs.
• Suitable for motors up to 2 HP.

Additional Information

Accessories

• 1 Water Level Controller – Model EMU2
• 1 Sensor Kit
• 2 Gitti Screws
• 1 Fitting Diagram
• 1 Warranty Card
• Company Contact Details