pH balancer for spraying solution
Pesticides are susceptible to alkaline hydrolysis in spray solutions. They decompose to an inactive form if the spray solution is alkaline. Water supplies in many areas range from pH 7.5-9.0 . This alkalinity results into poor pest control. Such decomposition is slowed or prevented by buffering spray solutions to a pH of 6.0 or below giving improved pest control and longer residual control
pH-OK decreases water hardness by decreasing salt content and reduces alkalinity by decreasing pH making water suitable for spraying addition of pH-OK to the spraying water shifts its color from dark red and as it reaches to desired pH, water shows specific aqual blue color. Thus no need of pH paper or pH meter to check solution pH every time.
It makes spraying solution as per desire for example pH of 5 to 5.5.
Dosage
Available water pH 7.0-8.0 - 0.4 to 0.7 ml/litre
High water pH (8 & above) - 0.7 to 1.0 ml/litre
Note
Spray solutions should not be acidified if they contain lime, lime sulfur or fixed copper products such as Bordeaux carbonate, hydride etc.
Mix PH-Ok to appropriate dose. Mix. Properly. Add actual formulation alter 5 minutes.
Don''t mix pH-Ok directly with actual formulation
PRODUCT HALF LIFE
pH 9 pH 7 pH5
Herbicides 10 min. 17hours l6days
Fungicides 2 min. 3 hr. 10hours
Insecticides 24 hrs. 10 days stable
HALF LIFE is time required for a product to lose 50% of its effectiveness
For agriculture use only