Vahra Technology Fully automatic water level controller (V50R3P) Pump Controller | for all 3 phase Submersible (borewell) with all protections

About Vahra Technology Fully automatic water level controller (V50R3P) Pump Controller

The V50R3P is a fully automatic three-phase water level controller designed for submersible motors. It works with DOL and L&T starters, provides phase break protection, and protects your motor from dry run, overload, and high/low voltage. Compatible with carbon or magnetic sensor kits, it is easy to install and saves water, time, and energy.
This controller turns the motor ON/OFF automatically based on tank water level. It shows the water level in the tank: Low, 25%, 50%, 75%, 99% and signals any faults with error indications. Works efficiently with only two wires and can be installed with DOL or L&T type starters. Suitable for three-phase submersible motors.

Key Features & Benefits of Vahra Technology Fully automatic water level controller (V50R3P) Pump Controller

• Fully automatic three-phase water level controller
• Suitable for DOL and L&T starters
• Phase break protection
• Fully automatic operation based on tank water level
• Only 2 wires required for installation
• Compatible with carbon or magnetic sensor kits
• 3-mode operation: AUTO / OFF / MANUAL
• 100% dry-run protection
• Overload/underload protection
• High/low voltage protection
• Water level display: Low, 25%, 50%, 75%, 99%
• Fault/error indications for quick identification of problems

Specifications

• Motor Type: Three-phase submersible motors
• Starter Compatibility: DOL and L&T starters
• Sensor Type: Carbon or Magnetic sensor kits
• Installation: Only 2 wires required
• Water Level Indication: Low, 25%, 50%, 75%, 99%
• Sensor: Water resistant
• Sensor Current: Ultra-low current (µA) for long life
• Installation: Easy installation

Uses

• Automatically turns the three-phase submersible motor ON/OFF based on tank water level.
• Helps maintain the required water level automatically.
• Protects the motor from dry running, overload/underload, and high/low voltage.
• Protects the motor from phase-break conditions.
• Can be used with DOL and L&T starter systems.
• Allows automatic or manual motor operation through AUTO/OFF/MANUAL modes.
• Helps prevent water wastage through automatic motor control.
• Makes water-level monitoring easier with Low, 25%, 50%, 75%, and 99% indications.
• Provides fault indications for easier troubleshooting.
• Helps save water, time, and energy.
• Suitable for three-phase submersible motor applications.

Additional Information

Accessories:

• 1 Water Level Controller – LARK/V50C1P
• 1 Sensor Kit
• 1 Sensor Kit Distancer
• 1 CT Coil
• 1 Connector
• 10 Tie Clamps
• 2 Gitti Screws
• 1 Fitting Diagram
• 1 Warranty Card
• Company Contact Details